Skip to main content

No more draughty, rotten,
inefficient sash windows.

No more draughty, rotten, inefficient sash windows.

Using revolutionary 10mm thick double glazed units we can retro fit sash windows, retaining the original appearance but with all the benefits of double glazing.

Not only can we restore sash windows to their original condition by focussing on both the mechanical and aesthetic aspects of the window, we can improve insulation and can save you money on heating bills.

Sash Window Restoration

Victorian sashes or Georgian glazing bars

If your home has original sash windows there’s a good chance that they don’t retain heat, they might leak or be draughty. It is now possible after decades of research to replace the glazing in sash windows with 10 – 12mm thick highly efficient double glazed units. These panels are so finely detailed that they can be fitted into Victorian sashes or Georgian glazing bars and not be noticed. It turns a cold inefficient period window into a condensation free unit while retaining the original integrity of the building.

Virtually all our customers opt for the double glazed system.

Repairing rotten window frames

Replacement is the last option

It’s not often necessary to replace windows or window frames when rot has taken a foothold. The replacement of an original window should be the last option.

By combining modern technology with good carpentry skills we cut out rotten timbers and splice in new wood ensuring that the problem is resolved permanently, rather than a short term fix.

We are recognised, fully qualified users of the “window care” resin system, which will leave the effected area looking as good as new.

Overhauling and Draughtproofing

Traditional Sash Windows have always been draughty, noisy and prone to letting dust and dirt in whilst allowing heat to rush out.

By opting us to carry out this service you will obtain the following benefits:

  • Eliminates draughts
  • Reduces noise
  • Stops rattling
  • Improves insulation
  • Reduces dirt and dirt ingress
  • Provides balanced windows
  • Improves security
  • Ensures smooth running windows
  • Provides fault free windows

We also offer an overhaul and draught seal service to casement windows and doors.

Double Glazed Sash Windows

Originality with benefits

Wherever possible we leave the existing frame in place, but repair as necessary. Most people prefer to keep the original wooden frames because they retain the originality of the building. The sash is removed, and the single glazing taken out. The sash is then stripped, prepared and fitted with double glazed units just 10-12mm thick which allows them to be fitted to most single glazed openings.

The benefits of double glazed units

  • The units offer excellent insulation due to the thermally efficient inert gas (xenon or krypton) sandwiched between the two panes of glass.
  • Low emissivity glass used for the inner pane reflects heat back into the room.
  • Once fitted the units will have the same appearance as the originals but will have all the benefits of double glazing.
  • Replacing one square metre of single glazing will give you a saving of approx., 90kg of carbon dioxide emissions per year by cutting heat loss, which will save money on heating bills.

Fitting a Double Glazed Sash Window

Undertaking a typical installation

A typical single glazed, draughty, Victoria Sash window, which needs restoration.
A typical single glazed, draughty, Victoria Sash window, which needs restoration.
Initially the sashes are removed from the frame.
Initially the sashes are removed from the frame.
Then we remove the old cords and existing cast iron weights.
Then we remove the old cords and existing cast iron weights.
We then re-cord using waxed nylon cord.
We then re-cord using waxed nylon cord.
The existing float glass (which has poor heat retention) is removed.
The existing float glass (which has poor heat retention) is removed.
The old putty is removed.
The old putty is removed.
The putty rebates are cleaned and their depth is increased.
The putty rebates are cleaned and their depth is increased.
One final check prior to fitting.
One final check prior to fitting.
The new, high performance 12mm double glazed unit is installed into the sash.
The new, high performance 12mm double glazed unit is installed into the sash.
A cross section showing just how compact the fitted unit is.
A cross section showing just how compact the fitted unit is.
The double glazed unit is sealed and puttied into the sash.
The double glazed unit is sealed and puttied into the sash.
The sash is weighed and the frame re-corded and re-weighted to ensure the correct operation when fitted.
The sash is weighed and the frame re-corded and re-weighted to ensure the correct operation when fitted.
The sash is re-fitted into the existing frame.
The sash is re-fitted into the existing frame.
New, draught–sealed beads are installed.
New, draught–sealed beads are installed.
The completed project, using the existing timber windows, but with all the benefits of modern double glazing.
The completed project, using the existing timber windows, but with all the benefits of modern double glazing.

Get a FREE Quote

In order to provide a quote we first need to do a FREE site survey, complete the form below or

Please call

0800 772 3148

and find out why we are London and the South East’s leading sash window company.

Max. file size: 2 MB.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.